24/7 emergency heating & AC help across North Carolina Call (330) 704-6386
Schedule 📞 (330) 704-6386

Smell Gas or CO Alarm Going Off? What to Do Right Now

Last reviewed:

Short answer

If you smell gas or your carbon monoxide alarm goes off, get everyone out of the house immediately, leave the door open behind you, and call 911 and your gas utility's emergency line from outside. Do not flip light switches, use the thermostat, or start a car in an attached garage. Do not go back inside until the fire department or utility says it is safe.

Homeowner adjusting a digital thermostat

Step-by-step checks

  1. Get out

    Leave right away with people and pets. Do not stop to open windows or look for the source.

  2. Avoid sparks

    Do not touch light switches, the thermostat, appliances or your phone until you are outside.

  3. Call from outside

    Call 911 and your gas utility's emergency number once you are a safe distance from the house.

  4. Watch for symptoms

    Headache, dizziness, nausea, confusion and drowsiness can be signs of carbon monoxide poisoning. Tell 911 if anyone has symptoms.

  5. Get the system inspected

    After responders clear the home, have a licensed HVAC technician inspect the furnace, venting and heat exchanger before using the heat again.

When to stop and call a pro

Stop troubleshooting and call 📞 (330) 704-6386 if you smell gas or burning, a breaker trips more than once, you see sparks or water near electrical parts, or the problem needs refrigerant or electrical work. Those jobs require a licensed technician.

Related questions

Is no heat an emergency?

Yes, when outside temperatures are near or below freezing, when anyone in the home is vulnerable to cold, or when pipes could freeze. Frozen pipes can burst and cause water damage that costs far more than the heating repair.

Why is my furnace blowing cold air?

Common causes are a thermostat set to FAN ON instead of AUTO, a dirty flame sensor that shuts the burners off, a failed igniter, an overheating furnace tripping its limit switch because of a clogged filter, or a gas supply problem.

Why does my furnace click but not turn on?

Clicking without ignition usually points to a failed hot surface igniter, a dirty flame sensor, a gas valve problem or a pressure switch that will not close. These need a licensed technician.

Find emergency furnace & heating repair in your city

Request a fast callback

Prefer to talk now? 📞 Call (330) 704-6386 — answered 24/7.

📞 Call 24/7ScheduleGet price