24/7 emergency service
Emergency Furnace & Heating Repair in North Carolina
No heat, furnace won't ignite, blowing cold air or short cycling. Get help before the pipes freeze.
Emergency? Call 24/7: (330) 704-6386
- Answered 24/7, incl. holidays
- Licensed NC HVAC contractors
- Price confirmed before work starts
Quick answer
If your furnace or heating system stops working, call (330) 704-6386 to reach a licensed North Carolina HVAC technician for emergency heating repair 24/7. If you smell gas or a carbon monoxide alarm goes off, leave the house first and call 911 and your gas utility from outside.
Last reviewed:
Signs you need emergency furnace & heating repair
- No heat, or vents blowing cold air
- Furnace clicks but never lights
- System turns on and off every few minutes (short cycling)
- Burning smell that lasts more than the first few minutes of the season
- Banging, booming or squealing noises
- Yellow or flickering burner flame instead of steady blue
- Carbon monoxide alarm sounding
What to do right now
- Gas smell or CO alarm? Get everyone out, then call 911 and your gas company from outside. Do not flip switches or start a car in an attached garage.
- Make sure the thermostat is set to HEAT and has fresh batteries.
- Check the furnace power switch (it looks like a light switch near the unit) and the breaker.
- Make sure the furnace access panel is fully closed. A loose panel triggers a safety switch that blocks heat.
- Replace a clogged filter. Restricted airflow can make a furnace overheat and shut down.
- In freezing weather, open cabinet doors under sinks and let faucets drip to keep pipes from freezing.
What happens when the technician arrives
- Safety check: the tech checks for gas leaks and carbon monoxide first.
- Diagnose: igniter, flame sensor, pressure switch, inducer motor, control board and blower.
- Quote: you get the price before any repair starts.
- Repair and test: the tech confirms safe ignition, clean combustion and steady heat.
Rolling 24/7
Fully equipped service vans, ready to roll across North Carolina
Partner technicians work out of stocked service vans that typically carry the parts behind most no-heat and no-cool calls: capacitors, contactors, igniters, flame sensors, fan motors and refrigerant. That means more repairs are finished on the first visit instead of waiting days for a part.
- Licensed North Carolina HVAC contractors
- Price confirmed before any work starts
- Nights, weekends & holidays
Emergency Furnace & Heating Repair by city
Choose your city for local details, neighborhoods covered and answers to common local questions.
- Emergency Furnace & Heating Repair in Charlotte
- Emergency Furnace & Heating Repair in Raleigh
- Emergency Furnace & Heating Repair in Greensboro
- Emergency Furnace & Heating Repair in Durham
- Emergency Furnace & Heating Repair in Winston-Salem
- Emergency Furnace & Heating Repair in Fayetteville
- Emergency Furnace & Heating Repair in Cary
- Emergency Furnace & Heating Repair in Wilmington
- Emergency Furnace & Heating Repair in High Point
- Emergency Furnace & Heating Repair in Concord
- Emergency Furnace & Heating Repair in Asheville
- Emergency Furnace & Heating Repair in Greenville
- Emergency Furnace & Heating Repair in Gastonia
- Emergency Furnace & Heating Repair in Jacksonville
- Emergency Furnace & Heating Repair in Chapel Hill
Troubleshooting guides
Why won't my furnace turn on?
A furnace that will not turn on is most often caused by a thermostat problem (dead batteries or wrong setting), a tripped breaker or furnace…
Learn more →What should I do if I smell gas or my carbon monoxide alarm goes off?
If you smell gas or your carbon monoxide alarm goes off, get everyone out of the house immediately, leave the door open behind you, and call…
Learn more →Frequently asked questions
Is no heat an emergency?
Yes, when outside temperatures are near or below freezing, when anyone in the home is vulnerable to cold, or when pipes could freeze. Frozen pipes can burst and cause water damage that costs far more than the heating repair.
Why is my furnace blowing cold air?
Common causes are a thermostat set to FAN ON instead of AUTO, a dirty flame sensor that shuts the burners off, a failed igniter, an overheating furnace tripping its limit switch because of a clogged filter, or a gas supply problem.
Why does my furnace click but not turn on?
Clicking without ignition usually points to a failed hot surface igniter, a dirty flame sensor, a gas valve problem or a pressure switch that will not close. These need a licensed technician.
What should I do if I smell gas near my furnace?
Leave the house right away, without flipping switches or using anything that could spark. From outside, call 911 and your gas utility's emergency line. Do not go back in until they say it is safe.
Are space heaters safe while I wait for a repair?
They can be, used carefully: keep them at least three feet from anything that can burn, plug them directly into a wall outlet (not an extension cord), and never leave them running while you sleep or leave the room. Never use a gas stove or oven to heat your home.
Other services
Emergency AC Repair
AC not cooling, blowing warm air, frozen, leaking or dead. Get a licensed tech fast, day or night.
Learn more →Heat Pump Repair
Heat pump blowing cold air, iced over, stuck on emergency heat or running nonstop.
Learn more →24/7 Emergency HVAC Service
Nights, weekends and holidays. One call connects you with a licensed tech near you.
Learn more →AC & Heat Pump Replacement
System too old to fix? Get quotes on a properly sized new AC or heat pump, often installed in a day.
Learn more →HVAC Tune-Ups & Maintenance
Spring AC and fall furnace tune-ups that catch weak parts before they fail on the worst day.
Learn more →Request a fast callback
Prefer to talk now? 📞 Call (330) 704-6386 — answered 24/7.